Lifting a Tesla Model 3 can damage the battery considerably. The rubber pad of most vehicle lifts is too wide for the lifting point of the vehicle and protrudes into the battery area. The protective cover and the battery itself can be pressed in.
For this reason, we have developed a universal solution for 2-post lifts and scissor lifts especially for this type of car. It is available in two sizes and is designed for professional workshop operation. Use on a jack is also possible.

Material:
The adapter consists of a galvanized high-strength metal plate and a rubberized pad. The total height is only 13mm. The rubberized pad has a diameter of 60 mm and also protects the paint on the underbody.

Application 2-post lift:
The adapter is placed directly on the rubber plate. The medium sized adapter is suitable for rubber plates from 120mm up to 140mm in diameter. The point in the middle indicates the lifting point. With a total height of 13mm, the adapter was designed that both standard lifts and lifts with increased payload are compatible with the adapter. The adapter can be easily removed after use.
 

Application scissor lift:
The adapter is placed directly on the rubber block. The elevation in the middle must be positioned over the hole of the lifting point. The medium sized adapter is suitable for rubber blocks up to 140mm in diameter. If the distance between the vehicle and the lifting platform is not sufficient for the rubber block and adapter, we also recommend our ramp (ref. no. 10.329) for an elevated position of the vehicle.
 

Application jack:
The adapter is placed on the metal plate of the jack or on an existing rubber plate. The medium sized adapter is suitable for a support surface from 120mm to 140mm in diameter.